Feature
1.Low voltage cut out isolator 2.Suitbale for most 12V/24V charging system 3.Surge protect 4.Easy to install
Summary
AOPEC Low Voltage Cut Out Isolator is a device which only sense voltage of one vehicle battery.Two moudules are provided for this isoator they are fully automatic module and manual module.
Fully Automatic Module--This isolator is used to prevent battery excessively discharge.When the battery voltage reached cut-in voltage,the isolator engages(it reverts to its original stage) connecting the load to the battery and isolator alert light switches off.When the voltage falls bellow cut-out voltage for 3-6 seconds the isolator automativally detects this and switches off the essential circuit load. This system eliminates the possibiliy of draining the battery and protects sensitive electronic equipment powered from the house battery from harmful engine startup spikes.
Manual Module--Under this module battery isolator adds a switch which is used to engage or disengage the battery isolator in special situation.When the voltage is lower than cut-in voltage, you can make the isolator engaged via an external lock switch if you need.
Electronic Specifications
P/N |
Rating Voltage |
Continuous Current |
Cut-in Voltage |
Cut-out Voltage |
BP401 |
12V |
40A |
12.8V |
11V |
BP402 |
24V |
40A |
25.6V |
22V |
BP801 |
12V |
80A |
12.8V |
11V |
LED Indications
On:Isolator engaged Off:Isolator disengaged
Dimensions
6.5(L)*67.5(W)*53.5(H)mm
Wiring Diagram
|